ISI Certification for Footwear
BIS ISI Certification for Footwear: ISI Certification for footwear is made mandatory by BIS in all categories. Manufacturers of footwear and shoes made of rubber-based, leather, and safety footwear must obtain a BIS license to label their products with the ISI mark. Obtain your ISI Certification for Footwear with ease with the help of our expert team at Indiaxis!
Free ISI Certification for Footwear Consultation by Expert
Introduction of BIS ISI Certification for Footwear
In a recent notice of the Department for Promotion of Industry and Internal Trade (DPIIT) All footwear producers are required to possess a BIS certification, and all footwear must be in compliance with any applicable Indian Standard and bear the Standard Mark (ISI Mark) with a valid license from the Bureau. It’s illegal to sell footwear made from leather or other materials that do not bear the ISI Mark certification. In this case it is prohibited for any manufacturer to be legally able to make footwear that does not have BIS ISI certification. In the event that they fail to comply, it could be a criminal offense that could result in prison sentences as well as hefty fines. If a manufacturer from outside the country intends to sell their footwear in India the first step is to get the BIS ISI certificate to import their footwear into India through an authorized Indian representative appointment. The distributors and sellers are all guided to only sell or import ISI certification for footwear in order to guarantee that consumers are safe and secure.
According to (Quality Control) Order, of DPIIT, Ministry of Commerce and Industry, BIS ISI certification is required for footwear made of leather and other materials. These standards of quality control for leather shoes as well as other shoes made from compound materials are scheduled to be put in place to stop imports and to prevent the manufacture of products that are not up to standards in India. This notice applies to a variety of types of leather footwear, which includes safety boots and anti-riot footwear as well.
Department has released three quality-control orders that will be used to protect and lie footwear made of polymer/rubber, leather and various other materials as well as PPE footwear that is required for accreditation of BIS.
The three QCOs are:
- Shoes made of leather as well as other types of materials (Quality Control) Order, 2020
- Shoes made of all-rubber as well as all Polymeric material as well as its constituents (Quality Control) Order, 2020
- Personal Protective Equipment – Footwear (Quality Control) Order, 2020
BIS ISI Certification for Leather Footwear and Footwear Compound:
The products included within the QCO “Footwear made of different materials and leather (Quality Control) order for 2020” are safety shoes, boots that include rubber soles for canvas boots canvas shoes rubber sole shoes, derby shoes, sports footwear and anti-riot footwear. The table below explains the type of footwear that they are, as well as their requirements and the name of the standard that is specified in the “Footwear made from leather and other materials (Quality Control) order, 2020.
| Sr. No. | Name of Footwear | Indian Standard | Title of Indian Standard |
| 1 | Leather safety boots and shoes | IS 1989 (Part 1): 1986 | Specification for leather safety boots and shoes Part 1 for miners |
| Specification for leather safety boots and shoes Part 2 for heavy metal industries | |||
| 2 | Canvas Shoes Rubber Sole | IS 3735: 1996 | Canvas Shoes, Rubber Sole- Specification |
| 3 | Canvas Boots Rubber Sole | IS 3736: 1995 | Canvas Boots, Rubber Sole- Specification |
| 4 | Safety Rubber Canvas Boots for Miners | IS 3736: 1995 | Safety Rubber Canvas Boots for Miners- Specification |
| 5 | Leather safety footwear having direct moulded rubber sole | IS 11226: 1993 | Leather safety footwear having direct moulded rubber sole-Specification |
| 6 | Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole | IS 14544: 1998 | Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole – Specification |
| 7 | Sports footwear | IS 15844: 2010 | Sports Footwear- Specification |
| 8 | High ankle tactical boots with PU – Rubber sole | IS 17012: 2018 | High ankle tactical boots with PU – Rubber Sole – Specification |
| 9 | Antiriot shoes | IS 17037: 2018 | Antiriot shoes – Specification |
| 10 | Derby shoes | IS 17043: 2018 | Derby shoes – Specification |
BIS Certification for Rubber & Polymeric Material Footwear
The items that are included within the order “Footwear Made out of all-rubber materials and their constituents (Quality Control) Order, 2020′ include rubber microcellular sheets, sandals made of PVC all gumboots made of rubber, and ankle boots Industrial and rubber ankle and knee boots, slippers made of rubber as well as rubber Hawai chappals, industrial PVC boots and more. This BIS Order for footwear certification covers the standards for quality control for footwear made of all polymeric and rubber materials along with its component parts.
The table below explains the different types of footwear, standards, and the name of the standard for ‘Footwear manufactured of all-rubber and all polymeric materials and their components (Quality Control) Order, 2020’.
| Name of Footwear | Indian Standard | Title of Indian Standard |
| Industrial and protective rubber knee and ankle boots | IS 5557: 2004 | Industrial and protective rubber knee and ankle boots – Specification |
| All rubber gum boots and ankle boots | IS 5557 (Part 2): 2018 | All rubber gum boots and ankle boots: Part 2 occupational purposes |
| Moulded solid rubber soles and heels | IS 5676: 1995 | Moulded solid rubber soles and heels- Specification |
| Rubber microcellular sheets for soles and heels | IS 6664: 1992 | Rubber microcellular sheets for soles and heels- Specification |
| Solid PVC soles and heels | IS 6664: 1992 | Rubber microcellular sheets for soles and heels- Specification |
| Solid PVC soles and heels | IS 6719: 1972 | Specification for solid PVC soles and heels |
| PVC sandal | IS 6721: 1972 | Specification for PVC sandal |
| Rubber HawaiChappal | IS 10702: 1992 | Rubber HawaiChappal- Specification |
| Slipper, rubber | IS 11544: 1986 | Specification for slipper, rubber |
| Polyvinyl chloride (PVC)industrial boots | IS 12254: 2021 | Polyvinyl chloride (PVC)industrial boots – Specification |
| Polyurethane sole, semirigid | IS 13893: 1994 | Polyurethane sole, semirigid- Specification |
| Unlined moulded rubber boots | IS 13995: 1995 | Unlined moulded rubber boots – Specification |
| Moulded plastic, footwear-Lined, Unlined Polyurethane, boots for general industrial use | IS 16645: 2018 | Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use- Specification |
| Footwear for men and women for municipal scavenging work | IS 16994: 2018 | Footwear for men and women for municipal scavenging work |
BIS Standards for PPE Footwear
The order ‘Personal Protective Equipment Footwear (Quality Control) Order, 2020’ covers personal protective equipment footwear.
| Name of Footwear | Indian Standard | Title of Indian Standard |
| Personal Protective Equipment – Footwear | IS 15298 (Part 2): 2016 | Personal protective equipment – Part 2 Safety Footwear |
| IS 15298 ( Part 3) : 2019 | Personal protective equipment – Part 3 Protective Footwear | |
| IS 15298 (Part 4) :2017 | Personal protective equipment – Part 4 Occupational Footwear |
It is important to inform that these items are not able to be manufactured, sold traded, imported, or sold unless they carry a standard marking (ISI marking). These three orders for mandatory BIS ISI certification for Footwear and other footwear, which contain new standards for quality control do not apply to goods or articles intended for export for export purposes. The three orders all state that the Bureau of Indian Standards (BIS) is the enforcement and certifying agency for the products mentioned on the list. The footwear manufacturer has obtained a Bureau of Indian Standards license from the bureau to use their ISI Mark on their footwear.
Process of BIS ISI Certification For Footwear
According to the DPIIT’s quality Control Orders on Footwear Products 27 footwear items are now subject to the requirement of BIS certification. In the first place, you must determine what is the Indian Standard for your product. Go through your Indian Standard and ensure that your product is compliant with the requirements stipulated by the Indian Standard and that your facility has the production and test facilities stipulated by the Indian Standard. Then, you need to establish login credentials on the BIS Manakonline login portal to submit a request for BIS ISI Licence for your footwear. There are two options for applying for BIS licenses: the normal process and a simplified one.
The following are the normal procedure for obtaining BIS ISI Certification for Footwear/shoes:
Step 1 : Documentation to be submitted prior to the filing the application
Step 2: Submitting application along with the required documents to BIS
Step 3: Scrutiny of the application by BIS officials
Step 4: Nomination of auditors for audit by BIS
Step 5: Audit the premises of manufacture by BIS auditor
Step 6: Draw a sample for independent testing
Step 7: Test your sample in a BIS-accredited lab
Step 8: Grant from BIS license to a shoe manufacturer
Document Required For BIS Certification For Footwear
The following documents are required to obtain BIS ISI certification for footwear
Factory Registration Documents and information
Identity evidence
Process flow chart for manufacturing
Information about Authorized Signatory and other related documents.
Testing facilities that are appropriate
Quality Control Parameters, and the respective records
Laboratory test report and other details under BIS standard
Conclusion:
BIS certifies any item. It is a complicated and time-consuming procedure that starts with the creation of the product, and then validation, and continues throughout all stages of the BIS verification process.
It is mandatory for manufacturers of footwear and importers to get an BIS ISI certification for footwear before they can apply that standard ISI label on shoes. Shoes that do not bear being marked with the ISI label isn’t allowed to be sold within the country. Indiaxis offers complete technical assistance to obtain BIS approval for any kinds of footwear.
The company we work with, Indiaxis, have been providing services to the industry as an all-in-one source for products that require regulatory compliance. With our vast experience and knowledge we offer complete professional guidance and support to obtain BIS ISI certification of footwear.